Series 4530 Floor Stand Reactors, 1 & 2 L Ordering Guide

Series 4530 Ordering Guide

The System Identification No. for the Base System is:
453__-T-SS-M-115-VS.25-2000-4848

Click on the selections below to develop a composite identification number which may be used to request a quote or to order a 4530 Series Reactor.

Please note that all options and combinations are not compatible with all models.

A Base Model
Model No.SizeVessel Style
45311000 mLMoveable Head, Moveable Cart
45322000 mLMoveable Head, Moveable Cart
45331000 mLFixed Head, Stationary Floor Stand
45342000 mLFixed Head, Stationary Floor Stand
45351000 mLMoveable Head, Stationary Floor Stand
45362000 mLMoveable Head, Stationary Floor Stand
High Pressure sizes are 970 mL & 1900 mL
B High Pressure Option
-No SymbolStandard Configuration, 1900 psi (131 bar)
-HP2900 psi (200 bar)
C Gasket / Maximum Temperature
-OVFKM O-ring / 225 °C
-OKFFKM O-ring / 300 °C
-TPTFE Compression Gasket / 350 °C
D Vessel Material of Construction
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2
-TI4Titanium Grade 4
-ZR702Zirconium Grade 702
-ZR705Zirconium Grade 705
See Materials of Construction for other available alloys.
E Magnetic Stirrer Drive
-MGeneral Purpose, 16 in-lb
-HDHeavy Duty, 60 in-lb
-FMD1Footless, General Purpose, 16 in-lb
-FMD2Footless, Heavy Duty, 60 in-lb
-FMD3Footless, Extra Heavy Duty, 120 in-lb
F Magnetic Stirrer Drive Material of Construction
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2
-TI4Titanium Grade 4
-ZR702Zirconium Grade 702
-ZR705Zirconium Grade 705
G Electrical Supply
-115115 VAC
-230230 VAC
H Motor Option
-VS .12Variable Speed, 1/8 hp
-VS .25Variable Speed, 1/4 hp
-VS .50*Variable Speed, 1/2 hp
-XP .25Explosion Proof Variable Speed, 1/4 hp
-XP .50*Explosion Proof, Variable Speed, 1/2 hp
-AM .25Air Motor, 1/4 hp
-AM .50Air Motor, 1/2 hp
-GDDGeared Direct Drive (Fixed Head Units Only)
* 230V Systems Only
I Stirred Drive Gear Ratios *
-3D3:1, 0-600 rpm
-5D5:1, 0-360 rpm
-10D10:1, 0-180 rpm
*For -GDD Motor Option Only.
J Pressure Gage
-30003000 psi / 200 bar
-20002000 psi / 137 bar
-10001000 psi / 70 bar
-600600 psi / 40 bar
-200200 psi / 14 bar
-100100 psi / 7 bar
K Internal Cooling Coil
-No SymbolNo Coil
-SCSerpentine Coil
L Bottom Drain Valve
-No SymbolNo Bottom Drain Valve
-BDVBottom Drain Valve, 3/8″ NPT for standard systems, 1/4″ NPT for HP systems
M Controller
-4848 (included in base system)PID Control, Ramp & Soak Programming, Motor Speed Control, and Data logging with Software. For use with up to three additional display modules.
-4848BSame as above but for use with up to six additional display modules.
-A2110EMotor Controller
-4871Process Controller (for enhanced control options)
View a complete list of Controllers and options.
M4848 Controller Options
-TDMTachometer Display Module
-MCMTachometer w/Motor Control Module
-PDMPressure Display Module
-HTMHigh Temperature Cut Off Module
-ETLMExternal Temperature Limit Module
-MTMMotor Torque Module (Must be installed in conjunction with the MCM)
-SVMSolenoid Valve Module (for cooling control)
-A1925E4RS-485 to USB Cable for 4848 Controller (required for data logging)
-A1925E6RS-485 to USB Converter, isolated, 30-ft
-A2208E**RS-485 Daisy Chain for Multiple Controllers
-A3504HCSpecView Software Package for 4838/4848 Controller
**Must be used with A1925E6
O Custom Options (List All Desired)
-ASAnchor Stirrer
-PSPaddle Stirrer
-SASpiral Stirrer
-GEGas Entrainment Stirrer
-BFRemovable Baffle Set
-SBStatic Catalyst Basket
-DBDynamic Catalyst Basket
-CADInternal Catalyst Addition Device
-XCADExternal Catalyst Addition Device
-SCPSolids Charging Port (Ball Valve)
-RCReflux Condenser
-RTCReflux/Take-Off Condenser
-WJWelded Jacket
-ABHAluminum Block Heater with Cooling Channels
-PLPneumatic Lift
View a complete list of Optional Accessories.
P Certifications
-No SymbolNo Certification
-ASMEASME Certification
-PEDPED Certification
-CHChina Certification
-PParr Certification
Q Spare Parts Kit
-4539MSpare Parts Kit for 4530 Series

Please note that all options and combinations are not compatible with all models.

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.