Series 4520 Bench Top Reactors, 1 & 2 L Ordering Guide

Series 4520 Ordering Guide

The System Identification No. for the Base System is: 452__-T-SS-M-115-VS.12-2000-4848

Click on the selections below to develop a composite identification number which may be used to request a quote or to order a 4520 Series Reactor.

Please note that all options and combinations are not compatible with all models.

A Base Model
Model No.SizeVessel Style
45231000 mLFixed
45242000 mLFixed
45251000 mLMoveable
45262000 mLMoveable
High Pressure sizes are 970 mL & 1900 mL.
B High Pressure Option
-No SymbolStandard Configuration, 1900 psi (131 bar)
-HP2900 psi (200 bar)
C Gasket / Maximum Temperature
-TPTFE Flat Gasket, 350 °C
-OVFKM O-ring, 225 °C
-OKFFKM O-ring, 300 °C
D Vessel Material of Construction
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2
-TI4Titanium Grade 4
-ZR702Zirconium Grade 702
-ZR705Zirconium Grade 705
See Materials of Construction for other available alloys.
E Magnetic Stirrer Drive
-MGeneral Purpose, 16 in-lb
-HDHeavy Duty, 60 in-lb
-FMD1Footless, General Purpose, 16 in-lb
-FMD2Footless, Heavy Duty, 60 in-lb
F Magnetic Stirrer Drive Material of Construction
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2
-TI4Titanium Grade 4
-ZR702Zirconium Grade 702
-ZR705Zirconium Grade 705
G Electrical Supply
-115115 VAC
-230230 VAC
H Motor Option
-VS .12Variable Speed, 1/8 hp
-VS .25Variable Speed, 1/4 hp
-VS .50*Variable Speed, 1/2 hp (230V  only)
-XP .25Explosion Proof, Variable Speed, 1/4 hp
-XP .50*Explosion Proof, Variable Speed, 1/2 hp (230V  only)
-AM .25Air Motor, 1/4 hp
-AM .50Air Motor, 1/2 hp
* For use with Heavy Duty Magnetic Stirrer
I Pressure Gage
-30003000 psi / 207 bar
-20002000 psi / 138 bar
-10001000 psi / 69 bar
-600600 psi / 40 bar
-200200 psi / 14 bar
-100100 psi / 7 bar
J Internal Cooling Coil
-No SymbolNo Coil
-SCSerpentine Coil
K Bottom Drain Valve
-No SymbolNo Bottom Drain Valve
-BDVBottom Drain Valve, 3/8″ NPT for standard systems, 1/4″ NPT for HP systems (4523 & 4525 only)
L Controller
-4848 (included in base system)PID Control, Ramp & Soak Programming, Motor Speed Control, and Data logging with Software. For use with up to three additional display slots.
-4848BSame as above but for use with up to six additional display slots.
-A2110EMotor Controller
-4871Process Controller (for enhanced control options)
View a complete list of Controllers and options.
M 4848 Controller Options
-TDMTachometer Display Module
-MCMMotor Control Module w/Tachometer
-PDMPressure Display Module
-HTMHigh Temperature Cut Off Module
-ETLMExternal Temperature Limit Module
-MTMMotor Torque Module (Must be installed in conjunction with the MCM)
-SVMSolenoid Valve Module (for cooling control)
-A1925E4RS-485 to USB Cable for 4848 Controller (required for data logging)
-A1925E6RS-485 to USB Converter, isolated, 30-ft
 -A2208E**RS-485 Daisy Chain for Multiple   Controllers
-A3504HCSpecView Software Package for 4838/4848 Controller
**Must be used with A1925E6
N Custom Options (List All Desired)
-ASAnchor Stirrer
-PSPaddle Stirrer
-SASpiral Stirrer
-GEGas Entrainment Stirrer
-BFRemovable Baffle Set
-SBStatic Catalyst Basket
-DBDynamic Catalyst Basket
-CADInternal Catalyst Addition Device
-XCADExternal Catalyst Addition Device
-SCPSolids Charging Port (Ball Valve)
-RCReflux Condenser
-RTCReflux/Take-Off Condenser
-WJWelded Jacket
-ABHAluminum Block Heater with Cooling Channels
-PLPneumatic Lift
View a complete list of Optional Accessories.
O Certifications
-No SymbolNo Certification
-ASMEASME Documentation
-CECE Documentation
-PParr Certification
P Spare Parts Kit
-4529MSpare Parts Kit for 4520 Series

Please note that all options and combinations are not compatible with all models.

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.