Series 4540 High Pressure Reactors, 600 & 1200 mL Ordering Guide

Series 4540 Ordering Guide

The System Identification No. for the Base System is:

Click on the selections below to develop a composite identification number which may be used to request a quote or to order a 4540 Series Reactor.

Please note that all options and combinations are not compatible with all models.

A Base Model
Model No.SizeVessel Style
4544600 mLMoveable Head, Bench Top
4544A600 mLMoveable Head, Floor Stand
4544C600 mLMoveable Head, Moveable Cart
4545600 mLFixed Head, Bench Top
4545A600 mLFixed Head, Stationary Floor Stand
4546C1200 mLMoveable Head, Moveable Cart
45471200 mLFixed Head, Bench Top
4547A1200 mLFixed Head, Stationary Floor Stand
B Gasket / Maximum Temperature
-TPTFE Flat Gasket, 350 °C
C Materials of Construction
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2*
-TI4Titanium Grade 4*
-NINickel 200*
-ZR702Zirconium Grade 702*
-ZR705Zirconium Grade 705*
See Materials of Construction for other available alloys.
*Maximum Pressure and/or Temperature are limited.
D Magnetic Stirrer Drive
-MGeneral Purpose, 16 in-lb
-HDHeavy Duty, 60 in-lb
-XHDHeavy Duty, 120 in-lb
-FMD1Footless, General Purpose, 16 in-lb
-FMD2Footless, Heavy Duty, 60 in-lb
-FMD3Footless, Extra Heavy Duty, 120 in-lb
E Magnetic Stirrer Drive Material of Construction
-No SymbolSame Material As Vessel
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2
-TI4Titanium Grade 4
-ZR702Zirconium Grade 702
-ZR705Zirconium Grade 705
F Electrical Supply
-115115 VAC
-230230 VAC
G Motor Option
-VS .12Variable Speed, 1/8 hp
-VS .25Variable Speed, 1/4 hp
-XP .25Explosion Proof, Variable Speed, 1/4 hp
-AM .25Air Motor, 1/4 hp
H Pressure Gage
-1000010000 psi / 690 bar
-75007500 psi / 517 bar
-50005000 psi / 345 bar
-30003000 psi / 207 bar
I Internal Cooling Coil
-No SymbolNo Coil
-SCSerpentine Coil
-CLSingle Cooling Loop
J Bottom Drain Valve
-No SymbolNo Bottom Drain Valve
-BDVBottom Drain Valve, 1″ NPS
K Controller
-4848 (included in base system)PID Control, Ramp & Soak Programming, Motor Speed Control, and Data logging with Software. For use with up to three additional display slots.
-4848BSame as above but for use with up to six additional display slots.
-A2110EMotor Controller
-4871Process Controller (For enhanced control options)
View a complete list of Controllers and options.
L4848 Controller Options
-TDMTachometer Display Module
-MCMMotor Control Module w/Tachometer
-PDMPressure Display Module
-HTMHigh Temperature Cut Off Module
-ETLMExternal Temperature Limit Module
-MTMMotor Torque Module (Must be installed in conjunction with the MCM)
-SVMSolenoid Valve Module (For cooling control)
-A1925E4RS-485 to USB Cable for 4848 Controller (Required for data logging)
-A1925E6RS-485 to USB Converter, isolated, 30-ft
-A2208ERS-485 Daisy Chain for Multiple Controllers (Must be used with A1925E6)
-A3504HCSpecView Software Package for 4838/4848 Controller
M Custom Options (List All Desired)
-ASAnchor Stirrer
-PSPaddle Stirrer
-GEGas Entrainment Stirrer
-SPSpiral Stirrer
-BFRemovable Baffle Set
-CADInternal Catalyst Addition Device
-XCADExternal Catalyst Addition Device
-SCPSolids Charging Port (Ball Valve)
-RCReflux Condenser
-RTCReflux/Take-Off Condenser
-WJWelded Jacket
-ABHAluminum Block Heater with Cooling Channels
View a complete list of Optional Accessories.
N Certifications
-No SymbolNo Certification
-ASMEASME Documentation
-CECE Documentation
-PParr Certification
O Spare Parts Kit
-4549MSpare Parts Kit for 4540 Series

Please note that all options and combinations are not compatible with all models.

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.