Series 4560 Mini Reactors, 100-600 mL Ordering Guide

Series 4560 Ordering Guide

The System Identification No. for the Base System is:  456__-T-SS-M-115-VS.12-2000-4848

Click on the selections below to develop a composite identification number which may be used to request a quote or to order a 4560 Series Reactor.

Please note that all options and combinations are not compatible with all models.

ABase Model
Model No.SizeVessel Style
4561300 mLMoveable Head
4562450 mLMoveable Head
4563600 mLMoveable Head
4564160 mL*Moveable Head
4565100 mL*Moveable Head
4566300 mLFixed Head
4567450 mLFixed Head
4568600 mLFixed Head
4566B160 mL*Fixed Head
4566C100 mL*Fixed Head
* High temperature option not available.
B High Temperature Option
-No SymbolStandard Configuration, 3000 psi / 200 bar
-HTHigh Temperature, 2000 psi / 138 bar at 500 °C
C Gasket / Maximum Temperature
-OVFKM O-ring / 225 °C
-OKFFKM O-ring / 300 °C
-TPTFE Flat Compression Gasket / 350 °C
-FGFlexible Graphite Gasket / 500 °C
D Vessel Material of Construction
-SST316 Stainless Steel
-MOAlloy 400*
-INAlloy 600
-HBAlloy B-2/B-3*
-HCAlloy C-276
-CSAlloy 20*
-TI2Titanium Grade 2*
-TI4Titanium Grade 4*
-ZR702Zirconium Grade 702*
-ZR705Zirconium Grade 705*
See Materials of Construction for other available alloys.
*Not available for HT option.
E Magnetic Stirrer Drive
-MGeneral Purpose, 16 in-lb
-FMD1Footless, 16 in-lb
F Magnetic Stirrer Drive Material of Construction
-SST316 Stainless Steel
-MOAlloy 400*
-INAlloy 600
-HBAlloy B-2/B-3*
-HCAlloy C-276
-CSAlloy 20*
-TI2Titanium Grade 2*
-TI4Titanium Grade 4*
-ZR702Zirconium Grade 702*
-ZR705Zirconium Grade 705*
*Not available for HT option.
G Electrical Supply
-115115 VAC
-230230 VAC
H Motor Option
-VS .12Variable Speed, 1/8 hp
-VS .25Variable Speed, 1/4 hp
-XP .25Explosion Proof Variable Speed, 1/4 hp
-AM .25Air Motor, 1/4 hp
I Pressure Gage
-30003000 psi / 200 bar
-20002000 psi / 137 bar
-10001000 psi / 70 bar
-600600 psi / 41 bar
-200200 psi / 14 bar
-100100 psi / 7 bar
J Internal Cooling Coil
-CLInternal Cooling Loop
K Bottom Drain Valve
-No SymbolNo Bottom Drain Valve
-BDVBottom Drain Valve Installed
(Not Available on High Temperature Vessels)
L Controller
-4848 (included in base system)PID Control, Ramp & Soak Programming, Motor Speed Control, and Data logging with Software. For use with up to three additional display slots.
-4848BSame as above but for use with up to six additional display slots.
-A2110EMotor Controller
-4871Process Controller (for enhanced control options)
View a complete list of Controllers and options.
M4848 Controller Options
-TDMTachometer Display Module
-MCMMotor Control Module w/Tachometer
-PDMPressure Display Module
-HTMHigh Temperature Cut Off Module
-ETLMExternal Temperature Limit Module
-MTMMotor Torque Module (Must be installed in conjunction with the MCM)
-SVMSolenoid Valve Module (for cooling control)
-A1925E4RS-485 to USB Cable for 4848 Controller (required for data logging)
-A1925E6RS-485 to USB Converter, isolated, 30-ft
-A2208E**RS-485 Daisy Chain for Multiple Controllers
-A3504HCSpecView Software Package for 4838/4848 Controller
**Must be used with A1925E6
N Custom Options (List All Desired)
-ASAnchor Stirrer
-PSPaddle Stirrer
-SASpiral Stirrer
-GEGas Entrainment Stirrer
-BFRemovable Baffle Set
-SBStatic Catalyst Basket
-CADInternal Catalyst Addition Device
-XCADExternal Catalyst Addition Device
-SCPSolids Charging Port (Ball Valve)
-RCReflux Condenser
-RTCReflux/Take-Off Condenser
-WJWelded Jacket
-ABHAluminum Block Heater with Cooling Channels
View a complete list of Optional Accessories.
O Certifications
-No SymbolNo Certification
-ASMEASME Certification
-PEDPED Certification
-CHChina Certification
-PParr Certification
P Spare Parts Kit
-4569MSpare Parts Kit for 4560 Series
-4569HTSpare Parts Kit for 4560HT Series

Please note that all options and combinations are not compatible with all models.

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.