Series 4590 Micro Stirred Reactors, 25-100 mL Ordering Guide

Series 4590 Ordering Guide

The System Identification No. for the Base System is:

Click on the selections below to develop a composite identification number which may be used to request a quote or to order a 4590 Series Reactor.

Please note that all options and combinations are not compatible with all models.

ABase Model
Model No.SizeVessel Style
459125 mLMoveable
459250 mLMoveable
4593100 mLMoveable
459625 mLFixed Head
459750 mLFixed Head
4598100 mLFixed Head
BTemperature / Pressure Options
-No Symbol3000 psi (207 bar) @ 350 °C
-HP5,000 psi (345 bar) @ 350 °C
-HP/HT*5,000 psi (345 bar) @ 500 °C
*Fixed Head Only
CGasket / Maximum Temperature
-TPTFE Flat Gasket, 350 °C
-OVFKM O-ring, 225 °C
-OKFFKM O-ring, 300 °C
-FGFlexible Graphite Flat Gasket, 500 °C (HP/HT option only)
DVessel Material of Construction
-SST316 Stainless Steel
-MOAlloy 400*
-INAlloy 600
-HBAlloy B-2*/B-3*
-HCAlloy C-276
-CSAlloy 20*
-TI2Titanium Grade 2*
-TI4Titanium Grade 4*
-ZR702Zirconium Grade 702*
-ZR705Zirconium Grade 705*
See Materials of Construction for other available alloys.
* Maximum temperature limited.
EMagnetic Stirrer Drive
-MGeneral Purpose Magnetic
FMagnetic Stirrer Drive Material of Construction
-SST316 Stainless Steel
-MOAlloy 400
-INAlloy 600
-HBAlloy B-2/B-3
-HCAlloy C-276
-CSAlloy 20
-TI2Titanium Grade 2
-TI4Titanium Grade 4
-ZR702Zirconium Grade 702
-ZR705Zirconium Grade 705
GElectrical Supply
-115115 VAC
-230230 VAC
HMotor Option
-VS .12Variable Speed, 1/8 hp
-VS .25Variable Speed, 1/4 hp
-XP .25Explosion Proof Variable Speed, 1/4 hp
-XP .25XATEX Explosion Proof Variable Speed (.18KW, 0-1300 rpm)
-AM .25Air Motor, 1/4 hp
IPressure Gage
-50005000 psi / 345 bar
-30003000 psi / 207 bar
-20002000 psi / 138 bar
-10001000 psi / 69 bar
-600600 psi / 40 bar
-200200 psi / 14 bar
-100100 psi / 7 bar
JBottom Drain Valve
-No SymbolNo Bottom Drain Valve
-BDVBottom Drain Valve (Not available on HP models)
-4848 (included in base system)PID Control, Ramp & Soak Programming, Motor Speed Control, and Data logging with Software. For use with up to three additional display slots.
-4848BSame as above but for use with up to six additional display slots.
-A2110EMotor Controller
-4871Process Controller (For enhanced control options)
View a complete list of Controllers and options.
L4848 Controller Options
-TDMTachometer Display Module
-MCMMotor Control Module w/Tachometer
-PDMPressure Display Module
-HTMHigh Temperature Cut Off Module
-ETLMExternal Temperature Limit Module
-MTMMotor Torque Module (Must be installed in conjunction with the MCM)
-SVMSolenoid Valve Module (For cooling control)
-A1925E4RS-485 to USB Cable for 4848 Controller (Required for data logging)
-A1925E6RS-485 to USB Converter, isolated, 30-ft
-A2208ERS-485 Daisy Chain for Multiple Controllers (Must be used with A1925E6)
-A3504HCSpecView Software Package for 4838/4848 Controller
MCustom Options (List All Desired)
-GEGas Entrainment Stirrer
-BFRemovable Baffle Set
-XCADExternal Catalyst Addition Device
-SCPSolids Charging Port (Ball Valve)
-RCReflux Condenser
-RTCReflux/Take-Off Condenser
-WJWelded Jacket
-ABHAluminum Block Heater with Cooling Channels
View a complete list of Optional Accessories.
-No SymbolNo Certification
-ASMEASME Documentation
-CECE Documentation
-PParr Certification
OSpare Parts Kit
-4599MSpare Parts Kit for 4590 Series
-4599HPHTSpare Parts Kit for 4590HPHT Series

Please note that all options and combinations are not compatible with all models.

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.