{"id":5240,"date":"2011-07-24T17:08:54","date_gmt":"2011-07-24T22:08:54","guid":{"rendered":"https:\/\/www.parrinst.com\/?page_id=5240"},"modified":"2018-03-07T17:31:16","modified_gmt":"2018-03-07T16:31:16","slug":"pressure-hose","status":"publish","type":"page","link":"https:\/\/www.parrinst.com\/de\/products\/non-stirred-pressure-vessels\/pressure-hose\/","title":{"rendered":"Pressure Hose"},"content":{"rendered":"
Three different pressure hose assembles are available<\/strong> for high pressure gas connections to both stirred and non-stirred reactors. The standard hose is a 6 foot length with a male, \u201cA\u201d socket connector on one side and a 1\/8 inch NPT(M) nipple with a 1\/4 inch NPT(M) bushing on the other end. The \u201cA\u201d socket side of the hose attaches to couplings installed on the inlet valve of all stirred reactors as well as to a side port of the gage block assembly for the non-stirred vessels. The choice of either 1\/8 inch NPT of \u00bc inch NPT on the opposite end of the hose allows for attachment to most gas tank valves, pressure regulators or other gas supply sources.<\/p>\n