One of the modifications most frequently requested is a port or other means to feed liquids, solids, or slurries into the vessel without removing the head. This can be done in various ways.
Solids Charging Port with Ball Valve
A ball valve with a 3/8″diameter opening can be installed on any one liter or larger vessel and used in conjunction with a high pressure pipette for injecting slurries under pressure. These are opened or closed with a quarter turn of the handle. Larger diameter valves are available for 1 gallon and larger vessels. These ball valves will withstand the full pressure developed in a reactor at moderate temperatures, but their pressure rating falls off rapidly at temperatures above 100 °C.
|Solids Charging Ports|
|Part No.||Nominal Size||Orifice Diameter, in.|
|A143VB||1/4″ NPT (F)||0.250|
|A132VB||3/8″ NPT (F)||0.375|
|396VBAD||1/2″ NPT (F)||0.406|
Internal Catalyst Addition Device (ICAD)
Parr has developed a unique device for adding small amounts of solids (or liquids) from a sealed container held within a reactor. The ICAD is of particular interest to users performing kinetic studies of catalytic reactions. This device consists of a small cylindrical chamber with a cap that is sealed to the body with an O-ring. It attaches to the underside of the vessel head with a 1/8″ NPT connection. To discharge the contents of the holder, gas pressure is applied through a valve installed on the top of the head. When the applied pressure is greater than the pressure within the reactor, the cap is forced open and the catalyst or other contents of the holder will be released into the reactor. This device works best in the taller, 450 mL and 600 mL Mini Reactors, and in the 1 liter and larger Parr Reactors.
|Internal Catalyst Addition Devices|
|Complete Reactor||Mounting Size, cc||Assembly No.||Thread|
|One Liter||8||A550HC||1/8″ NPT|
Solids Charging Device
A solids charging device in the head of a reactor can serve as a convenient solids charging port at atmospheric pressure. The body of this device is machined with an internal taper to aid in the delivery of the solids into the vessel. It has a convenient screw cap closure with an FKM O-ring seal for use up to 225 °C. Other O-ring materials are available upon request, either for higher temperature operation or material compatibility.
|Solids Charging Devices & External Catalyst Addition Device (XCAD)|
|Reactor||Available Fitting Sizes|
|Mini||1/4″ NPT (M)|
|1 & 2 Liter||3/8″ NPT (M)|
|Gallon & up||1/2″, 3/4″, & 1″ NPT (M)|
External Catalyst Addition Device (XCAD)
The addition of a specialized 5 mL or 10 mL chamber with a tools-free closure and two valves to the above solids charging device adds two important capabilities:
- The chamber/valves assembly can be removed from the reactor without tools and filled in a glove box, for example, if an atmosphere-sensitive catalyst is being used.
- Upon reattachment of the chamber/ valves assembly to the reactor, a high pressure gas source can be connected to the top of the device to allow addition of catalyst to the reactor at elevated temperature and pressure.
Similar to the Internal Catalyst Addition Device (ICAD) shown above, the XCAD is ideal for kinetic studies, and is often paired with a gas burette for constant pressure hydrogenation catalyst screening/characterization studies.
4878 Automated Liquid Sampler
Catalyst Addition Devices
Catalyst Testing System
Coned Pressure Fittings
Equipment for Use in Potentially Ignitable Atmospheres
External Valves and Fittings
Gas Measurement Systems
--Intermediate Supply Tanks
--High Pressure Gas Burettes
Insulated Electrical Glands
Liquids Charging Systems
--Liquid Metering Pumps
--Liquid Charging Pipettes
Motors and Drives
Safety Rupture Discs
Sample Collection Vessel
Solids/Slurry Addition Devices
Spare Parts Kits
--Gas Entrainment Impellers
Valves and Fittings
--Bottom Drain Valves
--Manual Control Valves for Compressed Gas Tanks
--Pressure Relief Valves
--Safety Check Valves