Series 4555 Floor Stand Reactors, 10-30 L RFQ

Series 4555 Request for Quotation

The System Identification No. for the Base System is:
455__-T-SS-HD-230-VS.75-2000-SC-C3-4848-ASME

Click on the selections below to develop a composite identification number which may be used to request a quote for a 4555 Series Reactor.

Please note that all options and combinations are not compatible with all models.

Your System ID No:
____-_-__-___
(automatically updates based on the selections below)

A Base Model
	Model No.	Size	Vessel Style
	4555	5 Gallon	Moveable Head
	4556	10 Liter	Moveable Head
	4557	5 Gallon	Fixed Head
	4558	10 Liter	Fixed Head
	4559	30 Liter	Fixed Head
B Gasket / Maximum Temperature
	-T	PTFE Flat Gasket, 350 °C
	-OV	FKM O-ring, 225 °C
	-OK	FFKM O-ring, 300 °C
C Vessel Material of Construction
	-SS	T316 Stainless Steel
	-MO	Alloy 400
	-IN	Alloy 600
	-HB	Alloy B-2/B-3
	-HC	Alloy C-276
	-CS	Alloy 20
	-TI2	Titanium Grade 2
	-TI4	Titanium Grade 4
	-ZR702	Zirconium Grade 702
	-ZR705	Zirconium Grade 705
See Materials of Construction for other available alloys.
D Magnetic Stirrer Drive
	-HD	Heavy Duty, 60 in-lb (Included in base system)
	-XHD	Extra Heavy Duty, 120 in-lb
	-FMD2	Footless Magnetic Drive, 60 in-lb
	-FMD3	Footless Magnetic Drive, 120 in-lb
E Magnetic Stirrer Drive Material of Construction
	-SS	T316 Stainless Steel
	-MO	Alloy 400
	-IN	Alloy 600
	-HB	Alloy B-2/B-3
	-HC	Alloy C-276
	-CS	Alloy 20
	-TI2	Titanium Grade 2
	-TI4	Titanium Grade 4
	-ZR702	Zirconium Grade 702
	-ZR705	Zirconium Grade 705
F Electrical Supply
	-230	230 VAC, Single Phase
	-400	400-415V 3-Phase “Y”
G Motor Option
	-VS .75	Variable Speed, 3/4 hp
	-XP .75	Explosion Proof Variable Speed, 3/4 hp
	-AM .100	Air Motor, 1 hp
	-GDD	Geared Direct Drive (Fixed Head Units Only)
H Geared Direct Drive Ratio (for -GDD Motor Option Only)
	3D	3:1, 0-600 rpm
	5D	5:1, 0-360 rpm
	10D	10:1, 0-180 rpm
I Pressure Gage
	-2000	2000 psi / 138 bar
	-1000	1000 psi / 69 bar
	-600	600 psi / 40 bar
	-200	200 psi / 14 bar
	-100	100 psi / 7 bar
J Internal Cooling Coil
	-No Symbol	No Coil
	-SC	Serpentine Coil
K Bottom Drain Valve
	-No Symbol	No Bottom Drain Valve
	-BDV	Bottom Drain Valve, 1″ NPT
L Heater Options
	-C3	Ceramic, 3-Zone (4555 only)
	-B3	Band Heaters, 3-Zone
	-WJ	Welded Jacket
	-MH	Flexible Mantle Heater, 1-zone, 2500 W, 200 °C max.
M Head Lift Mechanism (Table Floor Stand only)
	-EH	Electric Hoist (115 VAC)
N Controller
	-4848 (included in base system)	PID Temperature Control, Ramp & Soak Programming, Motor Speed Control knob, and Data logging with Software. (RS-485 to USB cable not included.) For use with up to three additional display slots.
	-4848B	Same as above but for use with up to six additional display slots.
	-4848M	With Slave Box, PID Control, Ramp & Soak Programming, and Data logging with Software (RS-485 to USB cable not included). For use with up to three additional display modules. (Recommended for 10L with Band Heaters. Required for 18.75L & 30L.)
	-4848T	Touchscreen Controller with PID Temperature Control, Ramp & Soak Programming, Motor Control Module, Pressure Display Module, and either High Temperature Module or External Temperature Limit Module. Internal data logging included.
	-A2110E	Motor Controller
	-4871	Process Controller (for enhanced control options)
View a complete list of Controllers and options.
O4848 Controller Options
	-TDM	Tachometer Display Module
	-MCM	Motor Control Module w/set point control of RPM
	-PDM	Pressure Display Module
	-HTM	High Temperature Cut Off Module
	-ETLM	External Temperature Limit Module
	-MTM	Motor Torque Module (Must be installed in conjunction with the MCM)
	-SVM	Solenoid Valve Module (for cooling control)
	-A1925E4	RS-485 to USB Cable for 4848 Controller (required for data logging)
	-A1925E6	RS-485 to USB Converter, isolated, 30-ft
	-A2208E	RS-485 Daisy Chain for Multiple Controllers
	-A3504HC	SpecView Software Package for 4838/4848 Controller
P Custom Options (List All Desired)
	-AS	Anchor Stirrer
	-PS	Paddle Stirrer
	-SA	Spiral Stirrer
	-GE	Gas Entrainment Stirrer
	-BF	Removable Baffle Set
	-XCAD	External Catalyst Addition Device
	-SCP	Solids Charging Port (Ball Valve)
	-RC	Reflux Condenser
	-RTC	Reflux/Take-Off Condenser
	-WJ	Welded Jacket
	-ABH	Aluminum Block Heater with Cooling Channels
View a complete list of Optional Accessories.
Q Certifications
	-No Symbol	No Certification
	-ASME	ASME Documentation
	-CE	CE Documentation
	-P	Parr Certification
R Spare Parts Kit
	-4559PCM	Spare Parts Kit for 4555 Series

Please note that all options and combinations are not compatible with all models.

Your System ID No:
____-_-__-___
(automatically updates based on the selections above)

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.