| AVessel Rating |
|
-No Symbol |
Standard Configuration, 1900 psi (131 bar) |
|
-LP |
500 psi (34 bar) (30 L & 40 L only) |
|
| BVessel Volume |
|
-10L |
10 Liter (2.6 Gallon), 7.75″ ID |
|
-18.75L |
18.75 Liter (5 Gallon), 9.5″ ID |
|
-30L |
30 Liter (7.9 Gallon), 10.25″ ID |
|
-40L |
40 Liter (10.5 Gallon), 11.25″ ID |
|
| CHead Mounting Style |
|
-No Symbol |
Moveable Head (10 L & 18.75 L only) |
|
-FH |
Fixed Head |
|
| DGasket / Maximum Temperature |
|
-T |
PTFE Flat Gasket, 350 °C |
|
-OV |
FKM O-ring, 225 °C (10 L & 18.75 L only) |
|
-OK |
FFKM O-ring, 300 °C (10 L & 18.75 L only) |
|
| EMaterial of Construction |
|
-SS |
T316 Stainless Steel |
|
-C20 |
Alloy 20 |
|
-MO |
Alloy 400 |
|
-IN600 |
Alloy 600 |
|
-IN625 |
Alloy 625 |
|
-HB |
Alloy B-2/B-3 |
|
-HC |
Alloy C-276 |
|
-NI |
Nickel 200 |
|
-TI2 |
Titanium Grade 2 |
|
-TI4 |
Titanium Grade 4 |
|
-ZR702 |
Zirconium Grade 702 |
|
-ZR705 |
Zirconium Grade 705 |
| See Materials of Construction for other available alloys. |
|
| FHead Configuration |
|
-1/4 |
One head opening, 1/4″ NPT port, plugged |
|
-3/8 |
One head opening, 3/8″ NPT port, plugged |
|
-RD |
Rupture disc port with rupture disc assembly & disc |
|
-VGR |
Two valves, pressure gage, rupture disc assembly, & thermowell |
|
-NS |
Non-standard, custom head opening |
|
| GOptional Fittings & Custom Options (Check all needed) |
|
-VD |
Single Valve Assembly with dip tube |
|
-DVD |
Double Valve Assembly with dip tube |
|
-SC |
Serpentine Cooling Coil |
|
-BDV |
Bottom Drain Valve, 1″ NPT |
|
-XCAD |
External Catalyst Addition Device (1″ through) |
|
-SCP |
Solids Charging Port (Ball Valve) |
|
-RC |
Reflux Condenser |
|
-RTC |
Reflux/Take-Off Condenser |
|
| HPressure Gage (VGR Required) |
|
-No Symbol |
None |
|
-2000 |
2000 psi / 138 bar |
|
-1000 |
1000 psi / 69 bar |
|
-600 |
600 psi / 40 bar |
|
-200 |
200 psi / 14 bar |
|
-100 |
100 psi / 7 bar |
|
| IStand Type |
|
-No Symbol |
None |
|
-FS |
Floor Stand, Table Support with Manual Lift (Moveable Head, 10 L & 18.75 L only) |
|
-FS-EH |
Floor Stand, Table Support with Electric Hoist (115 VAC) (Moveable Head, 10 L & 18.75 L only) |
|
-FSP |
Floor Stand with Pneumatic Lift (Fixed Head) |
|
| JHeater Options (require stand) |
|
-No Symbol |
None |
|
-C3 |
Ceramic, 3-Zone (Moveable Head, 18.75 L only) |
|
-B3 |
Band Heaters, 3-Zone |
|
-WJ |
Welded Jacket |
|
-FM |
Flexible Mantle Heater, 1-zone, 2500 W, 200 °C max. (10 L & 18.75 L only) |
|
|
|
| KController |
|
-No Symbol |
None |
|
-4838 |
PID Control, Ramp & Soak Programming, and Data logging with Software. For use with one additional display module. (Available only for 10L/18.75 L with Flexible Mantle Heater or 10 L with Band Heaters.) |
|
-4848M |
With Slave Box, PID Control, Ramp & Soak Programming, and Data logging with Software (RS-485 to USB cable not included). For use with up to three additional display modules. (Recommended for 10 L with Band Heaters. Required for 18.75 L with Ceramic or Band Heaters.) |
| View a complete list of Controllers and options. |
|
| LController Options (Check all needed) |
|
-PDM |
Pressure Display Module |
|
-HTM |
High Temperature Cut Off Module |
|
-ETLM |
External Temperature Limit Module |
|
-SVM |
Solenoid Valve Module (for cooling control) |
|
-A1925E4 |
RS-485 to USB Cable for 4838/4848 Controller (required for data logging) |
|
-A1925E6 |
RS-485 to USB Converter, isolated, 30-ft |
|
-A2208E |
RS-485 Daisy Chain for Multiple Controllers (Must be used with A1925E6) |
|
-A3504HC |
SpecView Software Package for 4838/4848 Controller |
|
| MElectrical Supply for Heater and/or Controller |
|
-No Symbol |
None |
|
-230 |
230 VAC, Single Phase (Typically 40A supply required) |
|
-400 |
400-415V 3-Phase “Y” |
|
| NCertifications |
|
-No Symbol |
No Certification |
|
-ASME |
ASME Documentation |
|
-CE |
CE Documentation |
|
-P |
Parr Certification |
