Series 8500 Floor Stand Stirred Reactors, 50 & 100 L RFQ

Series 8500 Request for Quotation

An example order number for a vessel in this series is:
8500-__Liter-OV-SS-XHD-400-VS.75-1000-B3-MH-4848MB-ASME

Click on the selections below to develop a composite identification number which may be used to request a quote for a Series 8500 Floor Stand Reactor System.

Please note that all options and combinations are not compatible with all models.

Your System ID No:
____-_-__-___
(automatically updates based on the selections below)

AVessel Volume
	-50L	50 Liter, 13 in (33 cm) I.D.
	-100L	100 Liter, 16 in (40 cm) I.D.
BGasket / Maximum Temperature
	-OV	FKM O-ring, 200 °C
	-T	PTFE Flat Gasket, 300 °C
CMaterial of Construction
	-SS	T316 Stainless Steel
	-IN600	Alloy 600
	-HC	Alloy C-276
See Materials of Construction for other available alloys.
DMagnetic Stirrer Drive
	-XHD	Extra Heavy Duty, 120 in-lbs
	-XX300	Extra-Extra Heavy Duty Magnetic Drive, 300 in-lbs
	-XX600	Extra-Extra Heavy Duty Magnetic Drive, 600 in-lbs
EMagnetic Stirrer Drive Material of Construction
	-SS	T316 Stainless Steel
	-IN600	Alloy 600
	-HC	Alloy C-276
FElectrical Supply
	-230	230 VAC (50 Liter only)
	-400	400-415V 3-Phase
GMotor Option
	-VS .75	Variable Speed, 3/4 hp
	-VS 1	Variable Speed, 1 hp or larger
HGeared Direct Drive Ratio
	-5D	5:1, 0-200 rpm
	-10D	10:1, 0-180 rpm
IPressure Gage (VGR Required)
	-No Symbol	None
	-2000	2000 psi / 138 bar
	-1000	1000 psi / 69 bar
	-600	600 psi / 40 bar
	-200	200 psi / 14 bar
	-100	100 psi / 7 bar
JBottom Drain Valve
	-No Symbol	No Bottom Drain Valve
	-BDV	Bottom Drain Valve
KHeater Options
	-No Symbol	No Heater
	-B3	Band Heaters, 3-Zone
	-WJ	Welded Jacket
LHead Lift Mechanism
	-EH115	Electric Hoist (115 VAC)
	-EH230	Electric Hoist (230 VAC)
MController
	-4848M	Master Controller
	-4848MB	PID Temperature Control, Ramp & Soak Programming, Motor Speed Control knob, and Data logging with Software. (RS-485 to USB cable not included.) For use with up to six additional display slots.
	-4871	Process Controller (for enhanced control options)
View a complete list of Controllers and options.
N4848 Controller Options
	-TDM	Tachometer Display Module
	-MCM	Motor Control Module w/set point control of RPM
	-PDM	Pressure Display Module
	-HTM	High Temperature Cut Off Module
	-ETLM	External Temperature Limit Module
	-MTM	Motor Torque Module (Must be installed in conjunction with the MCM)
	-SVM	Solenoid Valve Module (for cooling control)
	-A1925E4	RS-485 to USB Cable for 4848 Controller (required for data logging)
	-A1925E6	RS-485 to USB Converter, isolated, 30-ft
	-A3504HC	SpecView Software Package for 4838/4848 Controller
OOptional Fittings & Custom Options (Check all desired)
	-Spiral	Spiral Cooling Coil
	-XCAD	External Catalyst Addition Device (1″ thru passage)
	-SCP	Solids Charging Port (Ball Valve)
	-U-bar	U-bar Anchor Stirrer
PCertifications
	-No Symbol	No Certification
	-ASME	ASME Documentation
	-CE	CE Documentation
	-P	Parr Certification
QSpare Parts Kit
	-8500SPK	Spare Parts Kit with two Alloy 600 safety rupture discs

Please note that all options and combinations are not compatible with all models.

Your System ID No:
____-_-__-___
(automatically updates based on the selections above)

If you do not find the pressure, temperature, volume, or options you are looking for here, let us customize a system for you.