| ABase Model |
|
Model No. |
Size |
Vessel Style |
|
4555 |
18.75 Liter (5 Gallon), 9.5″ ID |
Moveable Head |
|
4556 |
10 Liter (2.6 Gallon), 7.75″ ID |
Moveable Head |
|
4557 |
18.75 Liter (5 Gallon), 9.5″ ID |
Fixed Head |
|
4558 |
10 Liter (2.6 Gallon), 7.75″ ID |
Fixed Head |
|
4559-30L |
30 Liter (7.9 Gallon), 10.25″ ID |
Fixed Head |
|
4559-40L |
40 Liter (10.5 Gallon), 11.25″ ID |
Fixed Head |
|
| BLow Pressure Option |
|
-No Symbol |
Standard Configuration, 1900 psi (131 bar) |
|
-LP |
500 psi (34 bar) (30 L & 40 L only) |
|
|
|
| CGasket / Maximum Temperature |
|
-T |
PTFE Flat Gasket, 350 °C |
|
-OV |
FKM O-ring, 225 °C (10 L & 18.75 L only) |
|
-OK |
FFKM O-ring, 300 °C (10 L & 18.75 L only) |
|
| DVessel Material of Construction |
|
-SS |
T316 Stainless Steel |
|
-MO |
Alloy 400 |
|
-IN |
Alloy 600 |
|
-HB |
Alloy B-2/B-3 |
|
-HC |
Alloy C-276 |
|
-CS |
Alloy 20 |
|
-TI2 |
Titanium Grade 2 |
|
-TI4 |
Titanium Grade 4 |
|
-ZR702 |
Zirconium Grade 702 |
|
-ZR705 |
Zirconium Grade 705 |
| See Materials of Construction for other available alloys. |
|
| EMagnetic Stirrer Drive |
|
-HD |
Heavy Duty, 60 in-lb (Included in base system for 10 L & 18.75 L) |
|
-XHD |
Extra Heavy Duty, 120 in-lb (10 L & 18.75 L only) |
|
-FMD2 |
Footless Magnetic Drive, 60 in-lb (10 L & 18.75 L only) |
|
-FMD3 |
Footless Magnetic Drive, 120 in-lb |
|
| FMagnetic Stirrer Drive Material of Construction |
|
-SS |
T316 Stainless Steel |
|
-MO |
Alloy 400 |
|
-IN |
Alloy 600 |
|
-HB |
Alloy B-2/B-3 |
|
-HC |
Alloy C-276 |
|
-CS |
Alloy 20 |
|
-TI2 |
Titanium Grade 2 |
|
-TI4 |
Titanium Grade 4 |
|
-ZR702 |
Zirconium Grade 702 |
|
-ZR705 |
Zirconium Grade 705 |
|
| GElectrical Supply |
|
-230 |
230 VAC, Single Phase |
|
-400 |
400-415V 3-Phase “Y” |
|
| HMotor Option |
|
-VS .75 |
Variable Speed, 3/4 hp |
|
-XP .75 |
Explosion Proof Variable Speed, 3/4 hp |
|
-AM .100 |
Air Motor, 1 hp |
|
-GDD |
Geared Direct Drive (Fixed Head Units Only) |
|
| IGeared Direct Drive Ratio (for -GDD Motor Option Only) |
|
3D |
3:1, 0-600 rpm |
|
5D |
5:1, 0-360 rpm |
|
10D |
10:1, 0-180 rpm |
|
| JPressure Gage |
|
-2000 |
2000 psi / 138 bar |
|
-1000 |
1000 psi / 69 bar |
|
-600 |
600 psi / 40 bar |
|
-200 |
200 psi / 14 bar |
|
-100 |
100 psi / 7 bar |
|
| KInternal Cooling Coil |
|
-No Symbol |
No Coil |
|
-SC |
Serpentine Coil |
|
| LBottom Drain Valve |
|
-No Symbol |
No Bottom Drain Valve |
|
-BDV |
Bottom Drain Valve, 1″ NPT |
|
| MHeater Options |
|
-C3 |
Ceramic, 3-Zone (4555 only) |
|
-B3 |
Band Heaters, 3-Zone |
|
-WJ |
Welded Jacket |
|
-MH |
Flexible Mantle Heater, 1-zone, 2500 W, 200 °C max. (10 L, 18.75 L only) |
|
| NHead Lift Mechanism (Table Floor Stand only) |
|
-EH |
Electric Hoist (115 VAC) |
|
| OController |
|
-4848 (included in base system) |
PID Temperature Control, Ramp & Soak Programming, Motor Speed Control knob, and Data logging with Software. (RS-485 to USB cable not included.) For use with up to three additional display slots. |
|
-4848B |
Same as above but for use with up to six additional display slots. |
|
-4848M |
With Slave Box, PID Control, Ramp & Soak Programming, and Data logging with Software (RS-485 to USB cable not included). For use with up to three additional display modules. (Recommended for 10L with Band Heaters. Required for 18.75L & 30L.) |
|
-4848T |
Touchscreen Controller with PID Temperature Control, Ramp & Soak Programming, Motor Control Module, Pressure Display Module, and either High Temperature Module or External Temperature Limit Module. Internal data logging included. |
|
-A2110E |
Motor Controller |
|
-4871 |
Process Controller (for enhanced control options) |
| View a complete list of Controllers and options. |
|
| P4848 Controller Options |
|
-TDM |
Tachometer Display Module |
|
-MCM |
Motor Control Module w/set point control of RPM |
|
-PDM |
Pressure Display Module |
|
-HTM |
High Temperature Cut Off Module |
|
-ETLM |
External Temperature Limit Module |
|
-MTM |
Motor Torque Module (Must be installed in conjunction with the MCM) |
|
-SVM |
Solenoid Valve Module (for cooling control) |
|
-A1925E4 |
RS-485 to USB Cable for 4848 Controller (required for data logging) |
|
-A1925E6 |
RS-485 to USB Converter, isolated, 30-ft |
|
-A2208E |
RS-485 Daisy Chain for Multiple Controllers |
|
-A3504HC |
SpecView Software Package for 4838/4848 Controller |
|
| QCustom Options (List All Desired) |
|
-AS |
Anchor Stirrer |
|
-SA |
Spiral Stirrer |
|
-GE |
Gas Entrainment Stirrer (10 L & 18.75 L only) |
|
-BF |
Removable Baffle Set |
|
-XCAD |
External Catalyst Addition Device |
|
-SCP |
Solids Charging Port (Ball Valve) |
|
-RC |
Reflux Condenser |
|
-RTC |
Reflux/Take-Off Condenser |
|
-WJ |
Welded Jacket |
| View a complete list of Optional Accessories. |
|
| RCertifications |
|
-No Symbol |
No Certification |
|
-ASME |
ASME Documentation |
|
-CE |
CE Documentation |
|
-P |
Parr Certification |
|
| SSpare Parts Kit |
|
-4555SPK |
Spare Parts Kit for 4555 Series |
